Omni Antifreeze Coolant is to meet the rigorous demands of all types of liquid cooled I.C. Engines cooling systems in Automobiles and Industries. It provides significant margin of safety against lubrication failure or Engine damage due to boil over, by effectively controlling and removing the excess heat produced in the engines. In addition, this also affords adequate freezing protection against low temperature operations. OMNI ANTIFREEZE COOLANT is a homogeneous Ethylene Glycol based mixture formulated with the most advanced and balanced state of art Corrosion Inhibitor and Anti-rust technology which prevents Corrosion & Cavitation erosion. The product conforms to all International Specifications, e.g, ASTM D3306, SASO, US MILITARY SPECS. etc.

The Product Ensures:

Maximum protection against boil over temperature and lowest freezing temperature.

A very high alkaline reserve to ensure longer cooling life.

Chemical stability and complete compatibility with water and other cooling solutions.

Excellent protection against corrosion to all cooling system metals.

Applications: Two types of products

1) OMNI COOLANT ANTIFREEZE –For cast-iron engines..

2) OMNI ALU-TECH- For aluminium engines

Various concentration for optimum result.

Products available in different concentrations and packaging

Handling Precautions:

Considered harmful or fatal in the case of oral ingestion. Prolonged contact with skin should be avoided as it may cause irritation. In case of splashes in eye should be removed immediately by irrigation of water.

The information given on this publication may be amended without notice..

Note: Use this information sheet only as a guideline for the use of this product. The information provided is in accordance with the latest technical developments. We do not accept responsibility of any work carried out with this product, as we have no control over the method of application used or the conditions on which the work was done. .


OMNI DEGREASER is a powerful water based alkaline detergent containing solvents. Its alkalinity along with the solvents helps in the quick and efficient removal of oil, dirt, and grease from floors, walls and equipments. It is a low viscosity pale yellow colored liquid which is nonflammable and readily miscible with water in all proportion.


OMNI DEGREASER is formulated to rapidly emulsify oil and grease and rinse freely from surfaces without re-depositing contamination. A built-in foam additive allows it to be used for foam cleaning and the product is buffered to maintain to high PH at use concentrations. It is a highly concentrated and powerful cleaner. The surfactants used in OMNI DEGREASER are biodegradable.

Area Of Applications:

OMNI DEGREASER is ideally suited for the cleaning of Oil drilling rode, floors and walls of garages, service stations, ports, oil drilling rigs, ship decks and other areas where generally there are heavy deposits of dirt and grease. OMNI degreaser can also be used for the spray cleaning of machines in the oil industry. Its ability to readily dissolve with sea water makes it ideal product for offshore degreasing operations. Its ability to quickly remove dirt and grease effortlessly makes it a perfect product for chassis cleaning of heavy vehicles, construction machinery, earth moving machinery and lift trucks.
Concentrated solutions of OMNI DEGREASER must not be used on Aluminum or its alloys.

Method of application and dilution:

Dilution will be as per requirement and actual use. OMNI DEGREASER can be applied either by spraying equipment, pressure cleaning, steam cleaning, immersion baths or by cloth, sponge, brush or mop. Always follow the cleaning operation with a water rinse until all traces of the detergent have eliminated.

Chemical And Physical Data:

Appearance : Yellow low viscous liquid
Sp. Gravity at 20 deg.C : 1.04 +/- 0.01
Viscosity at 20 deg.C : 30 cps. +/- 10cps.
PH : 11.5 +/- 0.3

Handling & Safety:

OMNI DEGREASER is considered to be of low hazard provided that good standards of industrial hygiene and safe working practices are maintained. The product can cause eye irritation. Prolonged contact with skin may give rise to skin irritation.
It is recommended that goggles, PVC, and protective overalls were worn during handling.
Avoid inhalation of any mist or vapors produced by high pressure spraying equipment.

First Aid:

Skin Contact : Wash skin immediately with soap and large amounts of water. Remove any contaminated clothing. If irritation persists, seek medical attention.
Eye Contact : Wash eyes with copious quantities of water or eye wash solution for at least 15 minutes. Seek medical attention.
Ingestion : Wash out mouth with water. Do not induce vomiting. Seek medical attention.
Pack size : 200 Litre Drum, 125 Litre Drum & 20 liter Can.
Storage : Keep tightly closed; away from heat or naked flames

Transport Information:

The information in this section is for reference only and should not take the place of a shipping paper (bill of lading) specific to an order. Based on our hazard characterization, the potential environmental hazard is: LOW
Based on our recommended product application and the product’s characteristics, the potential environmental exposure is: LOW Typical Proper Shipping Names for this product are as follows;.

Land /Air / Marine Transport:

Proper shipping Name: Environmentally Low hazardous substance, Liquid.
NOTE: Use this information sheet only as a guideline for the use of this product. The information provided is accordance with the latest technical developments. We do not accept responsibility of any work carried out with this product, as we have no control over the method of application used or the conditions on which the work was done.


It is an extremely efficient high quality detergent powder, which claims deepest penetration and fastest stain removal when using with colored and white clothes. :


Physical appearance : White free flowing powder With blue speckles

Fragrance: Lemon perfumed.


It is very effective as a mold release, or parting compound for cast concrete products. The use of OMNI CONCRETE MOLD RELEASE CHEMICAL results in terrazzo smooth finishes on concrete cast from slurries.

In addition to its performance as a parting compound, the product is effective as a rust preventive, protecting the metal forms from rusting during use and storage. themselves.

The Product Ensures:

Excellent & Quick cleaning of Rust, Dirt, Scales & Corrosion deposit from Radiator, Heater and other Engine cooling parts.

Restoring effective transfer of heat & proper cooling..

Increase Engine Coolant inhibitor life..

It will not harm any metal or rubber parts..

Direction For Use:

Prior to the treatment the Radiator Coolant liquid should be drained out completely. Then the cooling system is to be filled up with circulative water, which is mixed with “OMNI RADIATOR DESCALER” at the ratio of 1:9. Replace radiator cap and run engine at high for 10-15 minutes depending on the rust and particulate contamination deposits present in the cooling system. Drain cooling system while still hot, by opening drain valves. Flush the system well with water to remove all flushing solvents. Refill cooling system with good quality engine coolant, recommended 50% concentration for long can of OMNI RADIATOR DESCALER (1000 ml) is sufficient for a radiator of 10 litter capacity.

Typical Properties:

Appearance : Colorless Liquid

Sp.Gr @ 30’C : 1.2

pH : 10.8

Flash Point : None


OMNI RADIATOR DESCALER is available in 1 ltr. Can in a pack of 12 cans.

Handling Precautions:

General precautions to be taken which are applicable to handling of corrosive alkaline solutions. Extremely harmful or fatal in case of oral ingestion. Safety goggles and hand gloves should be worn during handling. In case of contact with skin, should be washed thoroughly by irrigation of water.